Products Linear Motion Components, Linear Bearings & Shafting Undrilled Tracks

"V" Groove Track

Undrilled | INCH

Specs
Drawing

• Carbon Steel, Hardened or Unhardened
• Stainless Steel, Hardened or Unhardened
• Single Edge

NOTE:
1. Lengths up to 20 feet for hardened, 22 feet for unhardened, are available on
special order. Lengths over 10 feet will require a cutting charge.
2. The portion below indexing shoulder is left soft so it may be drilled for
mounting.
3. Track can be easily butt-jointed for stroke lengths exceeding maximum
single-piece lengths of 20 feet plus.
4. The overall length tolerance is ± 1/16".

D Carbon Steel - Oiled Running Surface - Unhardened

H Carbon Steel - Oiled Running Surface - Hardened & Polished

S Stainless Steel - Oiled Running Surface - Unhardened

Y Stainless Steel - Oiled Running Surface - Hardened & Polished

Catalog Number	L in.	E	F	G	J	MDt	Weight lbs./ft.
BKYCOM-T178000X BKSCOM-T178000X BKHCOM-T178000X BKDCOM-T178000X	78	.437	.187	.031	.062	.125	.183
BKYCOM-T278000X BKSCOM-T278000X BKHCOM-T278000X BKDCOM-T278000X	78	.625	.250	.031	.093	.187	.343
BKYCOM-T378000X BKSCOM-T378000X BKHCOM-T378000X BKDCOM-T378000X	78	.875	.343	.062	.109	.250	.690
BKYCOM-T478000X BKSCOM-T478000X BKHCOM-T478000X BKDCOM-T478000X	78	1.062	.437	.093	.125	.312	1.100