Small Series Plain Sleeve Bearings
Inch
- Specs
- Drawing
- Clearance Data
• Sintered Bronze SAE 841
• Oil-Impregnated
• Self-Lubricating
NOTE: Use Technical Section, Table 2-2 installation data.
| RUNNING CLEARANCE | RECOMMENDED PRESS FITS | ||||
| Shaft Size in. |
Clearance min. in. |
Outside Dia. in. |
Press Fit, in. | ||
| Minimum | Maximum | ||||
| up to .760 | .0005 | up to 760 | .001 | .003 | |
| — | — | .761 to 1.510 | .0015 | .004 | |
Minimum recommended clearance for oil-impregnated bearings used with ground steel shafting.
| Catalog Number | I.D. +.001 -.000 |
O.D. +.001 -.000 |
L Length ± .005 |
|---|---|---|---|
| BSNPLN-Q100 | .1265 | .1905 | .125 |
| BSNPLN-Q102 | .1265 | .1905 | .250 |
| BSNPLN-Q104 | .1265 | .253 | .250 – .244 |
| BSNPLN-Q106 | .1265 | .253 | .414 – .410 |
| BSNPLN-Q108 | .157 | .253 | .125 |
| BSNPLN-Q110 | .157 | .253 | .187 |
| BSNPLN-Q112 | .157 | .253 | .265 |
| BSNPLN-Q114 | .188 | .253 | .187 |
| BSNPLN-Q116 | .188 | .253 | .210 |
| BSNPLN-Q118 | .188 | .253 | .243 |
| BSNPLN-Q120 | .188 | .253 | .305 |
| BSNPLN-Q122 | .188 | .253 | .330 |
| BSNPLN-Q124 | .188 | .253 | .343 – .337 |
| BSNPLN-Q126 | .188 | .253 | .406 |
| BSNPLN-Q128 | .188 | .253 | .468 |
| BSNPLN-Q130 | .188 | .284 | .186 – .182 |
| BSNPLN-Q132 | .188 | .3155 | .249 – .245 |
| BSNPLN-Q134 | .188 | .3155 | .500 |
| BSNPLN-Q136 | .188 | .4405 | .500 |
| BSNPLN-Q138 | .237 | .378 | .250 |
| BSNPLN-Q140 | .237 | .378 | .296 |
| BSNPLN-Q142 | .251 | .3155 | .115 |
| BSNPLN-Q144 | .251 | .3155 | .169 – .163 |
| BSNPLN-Q146 | .251 | .3155 | .187 |
| BSNPLN-Q148 | .251 | .3155 | .234 |
| BSNPLN-Q150 | .251 | .3155 | .250 |
| BSNPLN-Q152 | .251 | .3155 | .348 |
| BSNPLN-Q156 | .251 | .3155 | .390 |
| BSNPLN-Q158 | .251 | .3155 | .437 |
| BSNPLN-Q160 | .251 | .3155 | .500 |
| BSNPLN-Q162 | .251 | .378 | .218 |
| BSNPLN-Q164 | .251 | .378 | .312 |
| BSNPLN-Q166 | .251 | .378 | .406 |
| BSNPLN-Q168 | .251 | .378 | .500 |
| BSNPLN-Q170 | .251 | .378 | .570 – .566 |
| BSNPLN-Q172 | .251 | .378 | .719 |
| BSNPLN-Q174 | .251 | .4405 | .407 |
| BSNPLN-Q176 | .251 | .4405 | .437 |
| BSNPLN-Q178 | .250 | .503 | .218 |
| BSNPLN-Q182 | .313 | .378 | .125 |
| BSNPLN-Q184 | .313 | .378 | .208 |
| BSNPLN-Q186 | .3135 | .378 | .250 |
| BSNPLN-Q188 | .313 | .378 | .281 |
| BSNPLN-Q190 | .313 | .378 | .370 |
| BSNPLN-Q192 | .313 | .378 | .421 |
| BSNPLN-Q194 | .313 | .378 | .487 |
| BSNPLN-Q196 | .313 | .4405 | .187 |
| BSNPLN-Q198 | .313 | .4405 | .250 |
| BSNPLN-Q200 | .313 | .4405 | .500 |
| BSNPLN-Q202 | .313 | .503 | .312 |
| BSNPLN-Q204 | .313 | .503 | .437 |
| BSNPLN-Q206 | .313 | .503 | .703 |
| BSNPLN-Q208 | .313 | .503 | 1.000 |
| BSNPLN-Q210 | .328 | .472 | .500 |
| BSNPLN-Q212 | .328 | .472 | .750 |
| BSNPLN-Q214 | .328 | .503 | .437 |
| BSNPLN-Q216 | .376 | .503 | .187 – .183 |
| BSNPLN-Q218 | .376 | .503 | .500 |
| BSNPLN-Q220 | .376 | .503 | .625 |
| BSNPLN-Q222 | .376 | .503 | .813 |
| BSNPLN-Q224 | .376 | .5655 | .328 |
| BSNPLN-Q226 | .376 | .5655 | .500 |
| BSNPLN-Q228 | .376 | .5655 | .755 |
| BSNPLN-Q230 | .376 | .5655 | .995 |
| BSNPLN-Q232 | .376 | .628 | .312 |
| BSNPLN-Q234 | .376 | .628 | .432 |
| BSNPLN-Q236 | .376 | .628 | .627 – .623 |
| BSNPLN-Q238 | .439 | .5655 | .713 |
| BSNPLN-Q240 | .502 | .628 | .375 |
| BSNPLN-Q242 | .502 | .628 | .418 – .414 |
| BSNPLN-Q244 | .502 | .628 | .437 |
| BSNPLN-Q246 | .502 | .628 | .500 |
| BSNPLN-Q248 | .502 | .628 | .593 |
| BSNPLN-Q250 | .502 | .628 | 1.030 |
| BSNPLN-Q252 | .502 | .628 | .250 |
| BSNPLN-Q254 | .502 | .628 | .437 – .429 |
| BSNPLN-Q258 | .627 | .7535 | .373 |
| BSNPLN-Q262 | .627 | .7535 | .761 – .756 |
| BSNPLN-Q264 | .627 | .753 | .343 |
| BSNPLN-Q266 | .627 | .8785 | .323 |
| BSNPLN-Q268 | .627 | .8785 | .500 |
| BSNPLN-Q270 | .627 | .8785 | .625 |
