Products Sintered Bronze and Needle Roller Press Flange-Mounted, Needle Roller Bearing, Self-Aligning, Metric
Needle Roller Flange-Mounted Pressbearings, Drawn Cup
Metric
- Specs
- Drawing
- Shaft Recommendations
• Drawn Cup Needle Roller Bearing
• Carbon Steel Housing, Black Oxide Finish
• Self-Aligning Type
Features:
• Flange-mounted installation • Self-aligning to ±5°
Operating Temperature:
-30°C to +100°C
NOTE: Hardened steel shaft required.
The projections shown are per ISO convention.
SHAFT RECOMMEDATIONS:
Shaft should be hardened to HRC 58 with 0.4 µm finish.
Shaft ends should have radii or be chamfered.
Shaft should be hardened to HRC 58 with 0.4 µm finish.
Shaft ends should have radii or be chamfered.
| Catalog Number | d Nominal I.D. |
Shaft Dia. Min. |
Shaft Dia. Max. |
d1 Panel Clearance Hole Dia. |
L | F | E | Nom. G |
Max. Speed rpm |
Max. Radial Dyn. Load lbf |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| RFQ - BDNRSSMSABLK04 | 4 | 3.992 | 4.000 | 17 | 53 | 30 | 39 | 11.6 | 1.5 | 41000 | 1780 |
| BDNRSSMSABLK06 | 6 | 5.992 | 6.000 | 17 | 53 | 30 | 39 | 11.6 | 1.5 | 35000 | 2030 |
| BDNRSSMSABLK08 | 8 | 7.991 | 8.000 | 22 | 45 | 31.8 | 30.9 | 16.3 | 2.3 | 28000 | 2750 |
| BDNRSSMSABLK10 | 10 | 9.991 | 10.000 | 22 | 45 | 31.8 | 30.9 | 16.3 | 2.3 | 23000 | 4400 |
| BDNRSSMSABLK12 | 12 | 11.989 | 12.000 | 28 | 60 | 39.6 | 45.2 | 19.5 | 2.3 | 20000 | 4950 |
| BDNRSSMSABLK15 | 15 | 14.989 | 15.000 | 33 | 60 | 47 | 45.2 | 22.5 | 2.3 | 16000 | 7900 |
