Products Linear Motion Components, Linear Bearings & Shafting Open Type, Stainless Steel Retainer & Shell - Inch
Open-Type Linear Ball Bearings,Stainless Steel Retainer, Stainless Steel Shell
INCH
- Specs
- Drawing
- Tolerance

• Steel Shell Hardened to Rc 60-64
NOTE:
1. To order bearings with seals on both ends click on part number and select the
option.
2. 2-1/2", 3" and 4" sizes are nonseal type only.

*B Tolerance: |
---|
.5000, .6250, .7500 & 1.0000 +.0000 / -.0004 1.2500, 1.5000 & 2.0000 +.0000 / -.0005 |
‡O.D. Tolerance: |
.8750 & 1.1250 +.0000 / -.00050 1.2500 & 1.5625 +.0000 / -.00065 2.0000 & 2.3750 +.0000 / -.00075 3.0000 +.0000 / -.00090 |
ΔL Tolerance: |
1.250, 1.500 & 1.625 +.000 / -.008 2.250, 2.625, 3.000 & 4.000 +.000 / -.012 |
§E Tolerance: |
.963, 1.104 & 1.166 +.000 / -.008 1.755, 2.005, 2.412 & 3.192 +.000 / -.012 |
CATALOG NUMBER | Nominal Shaft Dia. |
Ball Circuit |
B* Bore |
O.D.‡ | LΔ Length |
E§ Groove Distance |
W1 Groove Width |
D Groove Dia. |
W2 Slot Width |
θ Slot Angle |
Load Capacity Dynamic lbf |
Load Capacity Static lbf |
---|---|---|---|---|---|---|---|---|---|---|---|---|
BLSABX-SWS8OS | 1/2 | 3 | .5000 | .8750 | 1.250 | .963 | .046 | .821 | .340 | 80° | 115 | 176 |
BLSABX-SWS10OS | 5/8 | 3 | .6250 | 1.1250 | 1.500 | 1.104 | .056 | 1.059 | .375 | 80° | 174 | 265 |
BLSABX-SWS12OS | 3/4 | 4 | .7500 | 1.2500 | 1.625 | 1.166 | .056 | 1.176 | .4375 | 60° | 194 | 308 |
BLSABX-SWS16OS | 1 | 5 | 1.0000 | 1.5625 | 2.250 | 1.755 | .068 | 1.469 | .5625 | 50° | 220 | 353 |
BLSABX-SWS20OS | 1-1/4 | 5 | 1.2500 | 2.0000 | 2.625 | 2.005 | .068 | 1.886 | .625 | 50° | 353 | 616 |
BLSABX-SWS24OS | 1-1/2 | 5 | 1.5000 | 2.3750 | 3.000 | 2.412 | .086 | 2.239 | .750 | 50° | 490 | 904 |
BLSABX-SWS32OS | 2 | 5 | 2.0000 | 3.0000 | 4.000 | 3.192 | .103 | 2.838 | 1.000 | 50° | 859 | 1785 |