Products Linear Motion Components, Linear Bearings & Shafting Closed Type, Stainless Steel Retainer & Shell - Inch

Closed Type Linear Ball Bearings, Stainless Steel Retainer, Stainless Steel Shell

INCH

Specs
Drawing
Tolerance

• Steel Shell Hardened to Rc 60-64

NOTE:
1. To order bearings with seals on both ends click on part number and select the
option.
2. 2-1/2", 3" and 4" sizes are nonseal type only.

*B Tolerance:
.2500, .3750, .5000, .6250, .7500 & 1.0000 +.0000 / -.0004 1.2500, 1.5000 & 2.0000 +.0000 / -.0005
‡O.D. Tolerance:
.5000 +.0000 / -.00045 .6250, .8750 & 1.1250 +.0000 / -.00050 1.2500 & 1.5625 +.0000 / -.00065 2.0000 & 2.3750 +.0000 / -.00075 3.0000 +.0000 / -.00090
ΔL Tolerance:
.750, .875,1.250, 1.500 & 1.625 +.000 / -.008 2.250, 2.625, 3.000 & 4.000 +.000 / -.012
§E Tolerance:
.511, .636, .963, 1.104 & 1.166 +.000 / -.008 1.755, 2.005, 2.412 & 3.192 +.000 / -.012

CATALOG NUMBER	Nominal Shaft Dia.	Ball Circuit	B* Bore	O.D.‡	LΔ Length	E§ Groove Distance	W Groove Width	D Groove Dia.	Load Capacity Dynamic lbf	Load Capacity Static lbf
BLSABX-SWS4CS	1/4	4	.2500	.5000	.750	.511	.039	.469	46	60
BLSABX-SWS6CS	3/8	4	.3750	.6250	.875	.636	.039	.588	50	70
BLSABX-SWS8CS	1/2	4	.5000	.8750	1.250	.963	.046	.821	114	176
BLSABX-SWS10CS	5/8	4	.6250	1.1250	1.500	1.104	.056	1.059	174	265
BLSABX-SWS12CS	3/4	5	.7500	1.2500	1.625	1.166	.056	1.176	193	308
BLSABX-SWS16CS	1	6	1.0000	1.5625	2.250	1.755	.068	1.469	220	353
BLSABX-SWS20CS	1-1/4	6	1.2500	2.0000	2.625	2.005	.068	1.886	353	616
BLSABX-SWS24CS	1-1/2	6	1.5000	2.3750	3.000	2.412	.086	2.239	490	903
BLSABX-SWS32CS	2	6	2.0000	3.0000	4.000	3.192	.103	2.838	860	1785