3-Arm - Self-centering
MECHANICAL PULLERS

BETEX 52

Patented self-centering 3-arm pullers (mechanical and hydraulic) for Ø40 mm through Ø640 mm.

The 3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards or outwards. There is no possibility of the arms bending or deflecting. Hydraulic screws with a 20-ton capacity are available for use in combination with the two largest pullers. The thread of the screws is in no way affected by the build up of hydraulic pressure, thus keeping wear and tear of the screws down to a minimum.

SHAFT PROTECTOR SETS
for Shaft Centers and Hollow Shafts


HYDRAULIC MINI-PRESS | 8/15 tons Capacity - BETEX 44

Hydraulic 8/15 tons Capacity Mini-press
When using mechanical screws, much of the force is lost as a result of the friction caused by the thread. This mini-press administers a shock to the part which is to be extracted. This enables optimal use to be made of BETEX pullers 52 and 54, without loss of force or wear and tear to screws.

*NOTE: For use with pullers TB-MP052230 through TB-MP52640.

Part No.	Capacity tons	Stroke mm
TB-MP044080	8	7
TB-MP044150	15	10