Internal Expander
Mechanical Pullers
- Specs
- Hammer
BETEX 62
Internal expander puller up to a bore of Ø150 mm
This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, e.g. in 'blind holes'. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc. Bearings, bushes, sealings etc. are extracted effortlessly.
Smaller, larger and longer sizes are available on request.
Internal expander puller up to a bore of Ø150 mm
This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, e.g. in 'blind holes'. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc. Bearings, bushes, sealings etc. are extracted effortlessly.
Smaller, larger and longer sizes are available on request.
BETEX 62-9
Slide Hammer Puller
Used in combination with the internal puller.
Slide hammer weight: 0.9 kg
2 Sizes with strokes of 90 mm and 300 mm
2 connecting threads (M10 and M14 x 1.5)
The advantage of the slide hammer is that it can be used independent of any supporting face.
After positioning the internal puller the slide hammer is connected through the hexagon adaptor.
Part #: TB-MP0629092
Up to bore: Ø39.5 mm
Part #: TB-MP0629302
Up to bore: Ø79.5 mm
Slide Hammer Puller
Used in combination with the internal puller.
Slide hammer weight: 0.9 kg
2 Sizes with strokes of 90 mm and 300 mm
2 connecting threads (M10 and M14 x 1.5)
The advantage of the slide hammer is that it can be used independent of any supporting face.
After positioning the internal puller the slide hammer is connected through the hexagon adaptor.
Part #: TB-MP0629092
Up to bore: Ø39.5 mm

Part #: TB-MP0629302
Up to bore: Ø79.5 mm
