Quality Bearings and Components (888) 276-4787
    Products   BEGA Bearing Pullers   Mechanical - 2-arm Pullers

2-Arm

Mechanical Pullers

  • Specs
  • Options
BETEX 46
Simple, handy 2-arm puller for parts gripped externally like pulleys, bearings, rings, etc.

Suitable for removing fans from electric motors.

During operation the arms can not slip because they are pressed against the cross bar. The higher the necessary pulling force, the stronger the arms are pressed against the cross bar. The one-hand operation of the puller permits easy use even under unfavorable conditions. A spring inside the housing guarantees a continual clamping of the forged alloy steel arms.

  Max. Dia. mm Max. Shaft Length mm
Type: 46-200
Part #: TB-MP046200
Request for Quote
60 40
Type: 46-000
Part #: TB-MP046000
Request for Quote
75 60
Type: 46-010
Part #: TB-MP046010
Request for Quote
110 100
Type: 46-020
Part #: TB-MP046020
Request for Quote
220 200

BETEX 47
Patented special 2-arm bearing pullers.
This bearing puller is particularly suitable for extracting bearings, bearing rings, etc. that fit flush with other parts. This system is generally applied when dismantling bearings from anchors, pump shafts, etc.

  Max. Dia. mm Max. Shaft Length mm
Type: 47-100
Part #: TB-MP047100
Request for Quote
45 65
Type: 47-200
Part #: TB-MP047200
Request for Quote
90 100
Type: 47-300
Part #: TB-MP047300
Request for Quote
150 150

BETEX 54
Patented 2-arm pullers for Ø40 mm through Ø350 mm.
This 2-arm puller is extremely well-suited for applications involving the extraction of bearing rings and inner rings (NU-NJ). Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts.

  Max. Dia. mm Max. Shaft Length mm Standard Max. Shaft Length mm with Extension Max. Shaft Length mm with Extension  
Type: 54-100
Standard
Part #: TB-MP054100

Request for Quote
80 100 200 250 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054101

Request for Quote
Type: 54-200
Standard
Part #: TB-MP054200

Request for Quote
120 125 200 250 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054201

Request for Quote
Type: 54-300
Standard
Part #: TB-MP054300*

Request for Quote
160 150 250 300 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054301*

Request for Quote
Type: 54-400
Standard
Part #: TB-MP054400*

Request for Quote
200 175 250 300 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054401*

Request for Quote
Type: 54-500
Standard
Part #: TB-MP054500*

Request for Quote
250 200 300 400 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054501*

Request for Quote
Type: 54-600
Standard
Part #: TB-MP054600*

Request for Quote
350 250 300 400 Max. Shaft Length (mm) with Extra Extension
Part #: TB-MP054601*

Request for Quote
*Note: The Hydraulic Mini-Press Option can be used with these pullers.

SHAFT PROTECTOR SETS
Shaft Centers and Hollow Shafts

BETEX 44 HYDRAULIC MINI-PRESS | 8/15 tons Capacity
When using mechanical screws, much of the force is lost as a result of the friction caused by the thread. This mini-press administers a shock to the part which is to be extracted. This enables optimal use to be made of BETEX pullers 52 and 54, without loss of force or wear and tear to screws.

NOTE: For use with BETEX 54 Pullers TB-MP049200, TB-MP052230, TB-MP054300 through TB-MP054600.

  Capacity tons Stroke mm Height mm
Part #: TB-MP044080
Request for Quote
8 7 35
Part #: TB-MP044150
Request for Quote
15 10 35