Quality Bearings and Components Cart(888) 276-4787
    Products   Thrust Bearings & Washers, Spacers   Self-Lubricating, Carbon Steel, Thrust Washers, Inch

Self-Lubricating

THRUST WASHERS – INCH


  • Specs
  • Drawing
Thrust Washers
• Carbon Steel Backing
• Self-Lubricating Liner
• Maintenance-Free

NOTE:
A composite liner consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE, and lead sliding lining. The bushing contains a certain quantity of lead which, owing to wear during operation, is gradually released and may mix with the products being manufactured. The quantity of lead released is minimal and does not normally exceed a few parts per million (ppm).

(Dimensions in inch)

Thrust Washers


Catalog Number I.D
+.010
O.D
+.010
T
+.0020
J
Dowel
Hole
-.010
A

BTNWAS-TW06TH .500 .875 .0585 .692 .067
BTNWAS-TW07TH .562 1.000 .0585 .786 .067
BTNWAS-TW08TH .625 1.125 .0585 .880 .099
BTNWAS-TW09TH .687 1.187 .0585 .942 .099
BTNWAS-TW10TH .750 1.125 .0585 1.005 .099
BTNWAS-TW11TH .812 1.375 .0585 1.099 .099
BTNWAS-TW12TH .875 1.500 .0585 1.192 .130
BTNWAS-TW14TH 1.000 1.750 .0585 1.380 .130
BTNWAS-TW16TH 1.125 2.000 .0585 1.567 .161
BTNWAS-TW18TH 1.250 2.125 .0585 1.692 .161
BTNWAS-TW20TH 1.375 2.250 .0585 1.817 .161
BTNWAS-TW22TH 1.500 2.500 .0585 2.005 .192
BTNWAS-TW24TH 1.625 2.625 .0585 2.130 .192
BTNWAS-TW26TH 1.750 2.750 .0585 2.255 .192
BTNWAS-TW28TH 2.000 3.000 .0895 2.505 .192
BTNWAS-TW30TH 2.125 3.125 .0895 2.630 .192
BTNWAS-TW32TH 2.250 3.250 .0895 2.755 .192