Products Linear Motion Components, Linear Bearings & Shafting Shafting, Solid, Predrilled Ceramic Coated Aluminum
Ceramic Coated Aluminum Shaft
Predrilled - Inch
- Specs
- Drawing

• 6105-T6 Aluminum Base Material • Rc 70 Ceramic Coated Finish
• Nonmagnetic and Vibration-Resistant
• Weld Splatter, Paints and Contaminants Will Not Stick
NOTES:
1. For non-standard lengths, the “y” dimension will be held to one end. It may
not be equal at both ends.
2. Ends of cut-to-length shafting are not coated.
3. Fully coated shafting is available on special request.
4. Counterbore .063" from top.
You can request any other length by filling out the request for quote form or call (888) 276-4787.

Catalog Number | Select Standard Length | Nom. Shaft O.D. |
Diameter Tolerance Min. |
Diameter Tolerance Max. |
Hole Spacing x |
Hole Spacing y |
Thread | Max. Length ft. |
Weight Per Inch lbs. |
---|---|---|---|---|---|---|---|---|---|
BBSHAF-CPDL08- | 1/2 | .4988 | .4996 | 4 | 2 | #6-32 | 12 | .019 | |
BBSHAF-CPDL10- | 5/8 | .6238 | .6246 | 4 | 2 | #8-32 | 12 | .030 | |
BBSHAF-CPDL12- | 3/4 | .7488 | .7496 | 6 | 3 | #10-32 | 12 | .043 | |
BBSHAF-CPDL16- | 1 | .9988 | .9996 | 6 | 3 | 1/4-20 | 12 | .077 | |
BBSHAF-CPDL20- | 1-1/4 | 1.2488 | 1.2496 | 6 | 3 | 5/16-18 | 12 | .120 | |
BBSHAF-CPDL24- | 1-1/2 | 1.4987 | 1.4995 | 8 | 4 | 3/8-16 | 12 | .173 | |
BBSHAF-CPDL32- | 2 | 1.9985 | 1.9995 | 8 | 4 | 1/2-13 | 12 | .308 |