Quality Bearings and Components Cart(888) 276-4787
    Products   Linear Motion Components, Linear Bearings & Shafting   Cam Followers, Needle Bearing, Stud Type

Needle Bearing Cam Followers

Stud Type – INCH


  • Specs
  • Drawing
Cam followers seald needle bearing
Roller & Needles - 52100 Steel • Stud - 1055 Steel
• Cage-Guided • Full-Complement • Needle Bearings • Slotted Head

NOTE: All versions available with seals.

*The basic load ratings C and Co apply if the bearing outer ring (with cylindrical   outside surface) is mounted into a housing with standard bearing fit; when
  used as track roller, the load ratings Cw and Cow apply.

**Maximum speeds shown are for grease lubrication. With oil lubrication, the
    speed can be increased by approximately 30% except for sealed versions.

***Clamping torque is based on lubricated threads. If threads are dry, double
      the values shown.

Cam followers studed type needle bearing



CATALOG NUMBER B1
Stud
Length
ØD
Roller
+.0000
-.0010
Ød
Stud
+.0010
-.0000
C
Roller
Width
+.000
-.005
B
Length
G
UNF
Thread
G1
Thread
Length
Lubrication Holes
ØM
Lubrication Holes
ØM1
B2 r
Corner
Radius
Load Ratings* lbs
C
Dynamic
Load Ratings* lbs
Co
Static
Load Ratings* lbs
Cw
Dynamic
Load Ratings* lbs
Cow
Static
Max.
Speed**
rpm
Stud Housing
Diameter
Min.
Stud Housing
Diameter
Max.
Ød2
Clamp.
Min.
Max.
Clamp.
Torque***
lb • in
BBXCAM-CF12 .875 .7500 .3750 .500 1.406 3/8-24 .375 .188 .125 .250 .020 1830 2900 1140 1650 6000 .3750 .3755 .500 65
BBXCAM-CF14 .875 .8750 .3750 .500 1.406 3/8-24 .375 .188 .125 .250 .039 1830 2900 1120 2220 6000 .3750 .3755 .500 65
BBXCAM-CF16 1.000 1.0000 .4375 .625 1.656 7/16-20 .500 .188 .125 .250 .039 2700 4300 1950 3000 5000 .4375 .4380 .594 105
BBXCAM-CF18 1.000 1.1250 .4375 .625 1.656 7/16-20 .500 .188 .125 .250 .039 2700 4300 2190 3550 5000 .4375 .4380 .594 105
BBXCAM-CF20 1.250 1.2500 .5000 .750 2.031 1/2-20 .625 .188 .125 .312 .039 4300 6300 3300 4800 4400 .5000 .5005 .750 165
BBXCAM-CF22 1.250 1.3750 .5000 .750 2.031 1/2-20 .625 .188 .125 .312 .039 4300 6300 3600 5400 4400 .5000 .5005 .750 165
Our Company
About DesignatronicsOur Management ApproachQuality Management SystemPress Releases and Events
Brands
SDP/SI - Stock Drive Products / Sterling Instrument QTC METRIC GEARSQuality Bearings and Components
Ordering Information
Terms and ConditionsPrivacy PolicyPaperless Invoices
Connect
FacebookLinkedinGoogle+Google+ (SDP/SI)Twitter