•
Roller & Needles - 52100 Steel •
Stud - 1055 Steel
• Cage-Guided • Full-Complement • Needle Bearings • Slotted Head
NOTE: All versions available with seals.
*The basic load ratings C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted into a housing with standard bearing fit; when
used as track roller, the load ratings Cw and Cow apply.
**Maximum speeds shown are for grease lubrication. With oil lubrication, the
speed can be increased by approximately 30% except for sealed versions.
***Clamping torque is based on lubricated threads. If threads are dry, double
the values shown.