• AISI 52100 Steel Shell Hardened to HRC 60-64
• Seals on Both Ends
NOTE: Seals are not removable.
| *d Tolerance: |
3, 4 & 5 mm -0.008
6 to16 mm -0.009
20, 25 & 30 mm -0.010
35, 40 & 50 mm -0.012
60 & 80 mm -0.015 |
| ΔD Tolerance: |
7, 8 & 10 mm -0.009
12 & 15 mm -0.011
19 to 28 mm -0.013
32, 40 & 45 mm -0.016
52, 60 & 80 mm -0.019
90 & 120 mm -0.022 |
| **L Tolerance: |
10, 12 & 15 mm -0.12
19 to 42 mm -0.2
59 to 110 mm -0.3
140 mm -0.4 |